Amprobe 600A Digital Clamp Meter

$65.74 (as of April 19, 2018, 2:21 am)

Digital clamp meter measures alternating current (AC) to 600 amp, direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfarads, resistance to 40 megaohms, and frequency to 100 kilohertz
True RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform
Transformer clamp with 1″ (26 mm) jaw opening has jaws that are slimmer than standard clamp jaws, for improved access to tight areas, and measures current without touching or interrupting the circuit

Buy product

Description

The Amprobe digital clamp meter is an average-sensing, auto-ranging multimeter for measuring current, voltage, capacitance, resistance, and frequency in electrical testing applications. It has a transformer clamp that measures alternating current (AC) to 600 amp and frequency to 100 kilohertz (kHz), and it comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfarads, resistance to 40 megaohms, and frequency to 100 kHz. The clamp has two 0.4″ (10 mm) thick jaws which can be slimmer than standard clamp jaws for improved get right of entry to to tight areas. The jaws can close around electrical conductors up to 1″ (26 mm) in diameter to measure current without touching or interrupting the circuit. A relative zero mode stores a reading in memory to make use of as a zero point for subsequent readings, taking into account quick comparison of a couple of readings. The maximum reading mode displays the highest reading in a session to track a sudden increase in measurements. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether a circuit’s diodes are working properly. The hold function assists in keeping the reading at the display, even after the meter is disconnected. The unit mechanically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter’s batteries wish to be replaced. A finger guard at the body of the meter helps give protection to fingers from shock.
Digital clamp meter measures alternating current (AC) to 600 amp, direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfarads, resistance to 40 megaohms, and frequency to 100 kilohertz
True RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform
Transformer clamp with 1″ (26 mm) jaw opening has jaws which can be slimmer than standard clamp jaws, for improved get right of entry to to tight areas, and measures current without touching or interrupting the circuit
A relative zero mode stores a reading in memory to make use of as a zero point for subsequent readings
Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V

Additional information

Binding

Style

,

Brand

Label

Manufacturer

PackageQuantity

ProductGroup

ProductTypeName

Publisher

Studio

Reviews

There are no reviews yet.

Be the first to review “Amprobe 600A Digital Clamp Meter”

Your email address will not be published. Required fields are marked *

Post comment