11/64″ x 11/64″ Square Notch Trowel for Ditra
$12.9911/64″ Square Notch Trowel
Rubberized ergonomic handle
Perfect for laying Schulter Ditra underlayment
12″ Jab Hand Saw, Comfortable Non-Slip Handle, Makes Easy Cuts Through Drywall, Wood and Plastic
$6.99Double-tooth blade design with pointed tip
Hardened teeth for longer tool life
Non-slip comfortable handle
Amprobe 600A Digital Clamp Meter
$65.74Digital clamp meter measures alternating current (AC) to 600 amp, direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfarads, resistance to 40 megaohms, and frequency to 100 kilohertz
True RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform
Transformer clamp with 1″ (26 mm) jaw opening has jaws that are slimmer than standard clamp jaws, for improved access to tight areas, and measures current without touching or interrupting the circuit
Amprobe Power Quality Clamp Meter
$205.64Voltage up to 1000V AC/DC, AC Current up to 600A, resistance, frequency, THD (total harmonics distortion) and individual harmonics from 1 to 25, power (kW), power factor
Low pass filter for variable frequency drives
Phase rotation indication
AstroAI Digital Clamp Meter, TRMS 6000 Counts Multimeter Volt Meter with Manual and Auto Ranging; Measures Voltage Tester, Current, Resistance, Continuity, Frequency; Tests Diodes, Temperature
TEST A WIDE RANGE of measurements including Voltage, AC Current, Resistance, Continuity, Capacitance, Frequency, and Temperature, Tests Diodes
PROFESSIONAL LEVEL features includes True RMS for accurate AC Current and Voltage readings. Also includes Auto-Ranging for faster and more accurate results
CONVENIENT FEATURES included Data Hold and a Large, LCD Backlit Screen, and Extra Large Clamp
Authentic Japanese Woodworking Flush Cut Trim Saw Flexible Blade
$17.99Flush-cut dowels, pegs and trim without scratching the surface
High carbon steel blade is extremely flexible to permit access to tight places
Cuts on the pull-stroke to eliminate buckling
Bon 13-151 Aluminum Hawk with Wood Handle, 8-Inch by 8-Inch
$16.14Aluminum material
Comfort grip handle
Includes callous preventer
Centurion Masonry Finishing Trowel – 4 ½” x 11” Blade
$14.99FINISHING TROWEL: Cement trowel for smoothing floor patch and levelers
STEEL BLADE: One-piece high carbon steel blades are hardened, tempered and ground
SOFT ERGONOMIC HANDLE: These tools have comfortable soft rubber handles, designed to reduce hand and arm fatigue while working
Collomix WK120HF Steel Hexafix Quick Connect Concrete Stirring Paddle, 4.72″ Diameter x 23.23″ Length, For 5 Gallons Mixers
The material is conveyed up to the top of the con-tainer from the bottom and then flows back down again at the sides
This is suitable for the proces-sing of heavy mixtures such as mortar, plaster, cement, and sand- and pebble-filled materials
The mixing tool works into the material easily with a screwing action
Craftsman 9-31794 Slotted Phillips Screwdriver Set, 17 Piece
$34.97Each Pack Includes 9 slotted screwdrivers: 3/32″ x 1 1/2″, 1/8″ x 2″, 1/8″ x 4″, 3/16″ x 1 1/2″, 3/16″ x 4″, 3/16″ x 6″, 3/16″ x 9″, 1/4″ x 4″, 1/4″ x 6″
Each Pack Includes 7 Philips screwdrivers: #0 x 1 1/2″, #0 x 2 1/2″, #1 x 1 1/2″, #1 x 3″, #2 x 4″, #2 x 6″, #2 x 8″
Each Pack Includes 4 in 1 pocket keychain
Craftsman True RMS Auto-Ranging Multimeter 34-82023 CAT III 600V
$79.99Craftsman’s Multi-Meter measures voltage, current, resistance and continuity
Digital LCD display
Includes test leads and 9V battery
Crescent CX6PT20 X6 Pass-Through Ratchet and Sockets, 20-Piece
Innovative X6 design of the socket allows you to grip 6 different types of fasteners
Able to work on the following types of fasteners: Hex, Square, 12pt., External Torx, Partially rounded hex and Spline
Every Pass-Thru socket replaces one standard and one deep socket
CS Unitec MGV 120 4.5″ Stainless Steel Mixing Paddle
$52.154.5″ Paddle
24″ Length
44lb batches
DC 6V 12V 24 Volts Voltage Gauge Test VoltMeter Circuit Tester Circuit Breaker Tester Electric Circuit Tester
$7.79Description : Circuit Tester Light Circuit Tester Pen DC 6V 12V 24 Volts Voltage Gauge Test VoltMeter Circuit Tester
Features : Led Circuit Tester Short Circuit Tester Test voltage DC 6V 12V 24V Suitable for many place( auto, boats, motor cycles and small engines)
Not produce heat when working, comfortable and safe. Compact size,easy to carry
Digital Clamp Meter, 4000 Counts Eventek ET820 Auto-ranging Multimeter with NCV For Measuring Non-contact AC / DC 600V Volt / 600A Amp / Frequency / Resistance / Capacitance / Continuity / Diodes
Autoranging clamp multimeter can be used to measure AC and DC Voltage, AC Current, Resistance, Diode test, Data Hold, Max Value Hold. troubleshoot electrical problems safely
Specification:AC Current:2A-600A, DC Voltage:200mV- 600V, AC Voltage:200mV- 600V, Resistance:200Ω-20MΩ
Made of high quality ABS, lightweight and portable,durable enough for long term use, Suitable for distribution box, electrical circuit, home users, enthusiasts, professional electricians and technicians