Brushless motor for superior performance
Power tool type cordless.Heavy-duty impact mechanism with max torque 700 ft./lbs., breakaway torque 1,200 ft./lbs.
3-speed selector switch for control
Compact, lightweight design fits into tight areas
3 LED Lights provide visibility without shadows
One-handed loading 1/4″ hex chuck accepts 1″ bit tips
DEWALT brushless motor delivers up to 57% more run time over brushed
DCF787 20V MAX* Compact Brushless 1/4″ Impact Driver; Compact (7.52″ front to back), lightweight design fits into tight areas
DCD777 20V MAX* Compact Brushless Drill/Driver; Compact (5.4″ front to back), lightweight (2.0 lbs) designed to fit into small spaces
Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
Three knife cutter-head delivers 30% longer knife life, fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
20V max* 5.0Ah XR battery for longer runtime and improved performance
Charges all 12v-20v max* batteries – 4 amp charge rate charger
Compatible with the entire line of DEWALT 20-volt max tools and Accessories
DCD780 20v MAX* 1/2″ Drill/Driver, and DCF885 1/4″ Impact Driver
DCS381 20v MAX* Reciprocating, and DCS393 20v MAX* Circular Saw
DCL040 20v MAX* LED Worklight, and DCR006 Jobsite Bluetooth Speaker
Lightweight design
No memory and virtually no self-charge
Reduces user fatigue
Part of the 20V MAX system of tools
Powerful high output motor
Cuts up to 3/4″ thick branches, 22″ laser cut
Compact (5. 70″ front to back), lightweight (3. 4 lbs) design fits into tight areas
Three (3) LED lights with 20 second delay after trigger release, provide visibility without shadows
Hog ring anvil to easily change sockets
Compact (5.70-Inch front to back), lightweight (3.4-Pound ) design fits into tight areas
Three (3) LED lights with 20 second delay after trigger release, provide visibility without shadows
Textured anti-slip comfort grip provides maximum comfort and control
Compact (5.70″ front to back), lightweight (3.4 lbs) design fits into tight areas
Three (3) LED lights with 20 second delay after trigger release, provide visibility without shadows
Hog ring anvil to easily change sockets
400-Feet Pound of maximum torque to perform a wide range of heavy-duty fastening applications
Ergonomic handle provides user superior comfort and control
Variable speed trigger with electric brake provides user improved control
Keyless 4-Position Blade Clamp
1-1/8″ Stroke Length
Variable Speed Trigger with 0-3000 spm
Compact and lightweight design
fits between studs and allows users to make cuts in confined spaces
4-Position Blade Clamp allows for flush cutting
Integrated LED lights
Bump operating mode
20-degree finish nailer
No more air compressors
No more hoses to trip over
Brushless motor
